Behavior: The Control of Perception by William Powers applies control theory to psychology to develop a model of human intelligence that seems relevant to two of LW's primary interests: effective living for humans and value-preserving designs for artificial intelligence. It's been discussed on LW previously here, here, and here, as well as mentioned in Yvain's roundup of 5 years (and a week) of LW. I've found previous discussions unpersuasive for two reasons: first, they typically only have a short introduction to control theory and the mechanics of control systems, making it not quite obvious what specific modeling techniques they have in mind, and second, they often fail to communicate the differences between this model and competing models of intelligence. Even if you're not interested in its application to psychology, control theory is a widely applicable mathematical toolkit whose basics are simple and well worth knowing.

Because of the length of the material, I'll split it into three posts. In this post, I'll first give an introduction to that subject that's hopefully broadly accessible. The next post will explain the model Powers introduces in his book. In the last post, I'll provide commentary on the model and what I see as its implications, for both LW and AI.

Control theory is a central tool of modern engineering. Briefly, most interesting things can be modeled as dynamical systems, having both states and rules on how those states change with time. Consider the 3D position and velocity of a ball in a bowl (with friction); six numbers tell you where the ball is, its speed, and its direction of movement, and a formula tells you how you can predict what those six numbers will be in the next instant given where they are now. Those systems can be characterized by their **attractors**, states that are stable and are the endpoint for nearby states. The ball sitting motionless in the bottom of the bowl is an attractor- if it's already there, it will stay there, and if it's nearby (releasing from a centimeter away, for example), it will eventually end up there. The point of control theory is that adding a **control** to a dynamical system allows you to edit the total system dynamics so that the points you *want* to be stable attractors *are* stable attractors.

Let's flesh out that sketch with an example. Suppose you want to keep a house within a specific temperature range. You have a sensor of the current temperature, a heater, and a cooler. A thermostat takes the sensor's output, compares it to the desired temperature range, and turns the heater on if the sensed temperature is below the desired temperature range, and turns if off if the sensed temperature is above the minimum of that range, and does the reverse with the cooler (turning it on if the sensor is above the desired max, and turning it off if it's below).

Most interesting control systems are have a finer range of control values- instead of simply flipping an on or off switch, a car's cruise control can smoothly vary the amount of gas or brake that's being applied. A simple way to make a control system is to take the difference between the desired speed and actual speed, multiply it by some factor to go from units of distance per time to angle of pedal, and adjust the position of the pedals accordingly. (If the function is linear, it's called a linear controller.)

Let's introduce more of the technical vocabulary. The thing we're measuring is the **input** (to the controller), the level we want it to be at is the **reference**, the difference between those is the **error**, and the adjustment the control system makes is the **output** or **feedback** (sometimes we'll talk about the **actuator** as the physical means by which the controller emits its output). None of them have to be single variables- they can be vectors, which allow us to describe arbitrarily complicated systems. (The six numbers that express the position and velocity of a ball, each in three dimensions, are an example of an input vector.) I'll often use the noun **state** to refer to the, well, *state* of the system, and 'points in state-space' refers to those states as vectors. There's also a possible confusion in that the *plant* (the system being controlled) and the *controller* are mirrored- the controller's output is the plant's input, and the plant's output is the controller's input.

Control systems naturally lend themselves to diagrams: here's the block diagram from the thermostat and cruise control:

In a block diagram, each block is some function of its inputs, and the arrows show what affects what. Moving left to right, the reference is the temperature you've set, the current temperature is subtracted (that's the point of the plus and minus sign), and the error goes into the yellow box which represents the function that converts from the error to the effort put into altering the system. That's the controller output arrow that goes into the green box (the house), which represents the external system. This is also a functional block, because it takes the controller output and any disturbances (often represented as another arrow pointing in from the top) and converts them into the system temperature. The arrow leading out of the house points both to the right- to remind you that this is the temperature you're living with- and back into the thermocouple, the sensor that measures the temperature to compare with the reference, and now we've finished our feedback loop.

Now that we have a mathematical language for modeling lots of different systems, we can abstract away the specifics and prove properties about how those systems will behave given various controllers (i.e. feedback functions). Feedback functions convert the input and reference to the output, and are the mathematical abstraction of a physical controller. They can be arbitrary functions, but most of the mathematical edifice of control theory assumes that everything is continuous (but not necessarily linear). If you know the dynamics of a system, you can optimize your control function to match the system and be guaranteed to converge to the reference with a particular time profile. Rather than go deeply into the math, I'll discuss a few concepts that have technical meanings in control theory that are useful to think about.

First is **convergence**: the system output will eventually match the reference. This means that any errors that get introduced into the system are transient (temporary), and ideally we know the time profile of how large those errors will be as time progresses. A common goal here is **exponential** convergence, which means that the error decreases with a rate proportional to its size. (If the temperature is off by 2 degrees, the rate at which the error is decreasing is twice that of the rate when the temperature is off by 1 degree.) A simple linear controller will, for simple state dynamics, accomplish exponential convergence. If your system doesn't converge, then you are not successfully controlling it, and if your reference changes unpredictably at a rate faster than your system can converge, then you are not going to be able to match your reference closely.

Second is **equilibrium**: a point when the forces are balanced. If the system is at an equilibrium state, then nothing will change. This is typically discussed along with steady state error: imagine that my house gets heated by the sun at a rate of 1° an hour, and rather than a standard air conditioner that's on or off I have a 'dimmer switch' for my AC. If my controller sets the AC rate at the difference between the reference temperature and the current temperature per hour, then when the house is at 30° and I want it to be at 23° it'll try to reduce the temperature by 7° an hour, but when the house is at 24° and I want it to be at 23° it will try to reduce the temperature by 1° an hour, which cancels the effect of the sun, and so the house is at equilibrium at 24°. (Most real controllers have an integrator in order to counteract this effect.)

Third is **stability**: even when we know a point is an equilibrium, we want to know about the behavior in the neighborhood of that point. A stable equilibrium is one where a disturbance will be corrected; an unstable equilibrium is one where a disturbance will be amplified. Imagine a pendulum with the bob balanced at the bottom- tap it and it'll eventually be balanced at the bottom again, because that's a stable equilibrium (also called an attractor). Now imagine the bob balanced at the top- tap it, and it'll race away from that point, unlikely to return, because that's an unstable equilibrium (also called a repulsor).

Stability has a second meaning in control theory: a controller that applies *too much* feedback will cause the system to go from a smaller positive error to a moderate negative error, and then again too much feedback will be applied, and the system will go from a moderate negative error to a huge positive error. Imagine a shower with a delay: you turn the temperature knob and five seconds later the temperature of the water coming out of the showerhead changes. If you react too strongly or too quickly, then you'll overreact, and the water that started out too hot will correct to being too cold by the time you've stopped turning the knob away from heat. That an overexuberant negative feedback controller can still lead to explosions is one of the interesting results of control theory, as is that making small, gradual, proportionate changes to the current state can be as effective as memory / implementing a delay in your controller. Sometimes, you achieve better control exactly because you applied *less* control effort.

It's also worth mentioning here that basically all real controllers (even amplifiers!) are negative feedback controllers- positive feedback leads to explosions (literally), because "positive feedback" in this context means "pushing the system in the direction of the error" rather than its meaning in psychology.

So what's the point of control systems? If we have a way of push the states of a system, we can effectively adjust the system dynamics to make *any* state that we want a stable state. If we put a motor at the joint of a pendulum, we can adjust the acceleration of the bob so that it has an equilibrium at one radian away from vertical, rather than zero radians away from vertical. If we put a thermostat in a house, we can adjust the temperature changes of the house so that it returns to a comfortable range, instead of whatever the temperature is outside. (The point of control theory is to understand how the systems work, so we can make sure that our control systems do what we want them to do!)

Why are control systems interesting? Three primary reasons:

- They're practical. Control systems are all over the place, from thermostats to cars to planes to satellites.
- They can be adaptive. A
**hierarchical**control system has a control loop which determines the parameters used in another control loop, and a natural application is adaptive control systems. When you launch a satellite, you might not have precise measurements of its rotational inertia, or you might expect that to change as it uses its fuel over its lifetime. One control system could observe how the satellite moves in response to its thrusters, and adjust the parameters of a rotational inertia model to correct errors to match the model to the observations. A second control system could use the inertia model created by the first control system to determine how to use the thrusters to adjust the satellite's alignment to match the desired rotation. - They give concrete mathematical models of how simple signal processing can create 'intentional' behavior, and of what it looks like to be intentional without an explicit model of reality. A centrifugal governor is not an agent in the LW sense of the term, but it is an agent in another sense of the term--an entity that performs actions on behalf of another. The governor is just some pieces of metal, it doesn't have a mind, it's not viewed with moral concern, it doesn't have goals as humans think of them, and it doesn't have even a rudimentary internal model of the dynamical system it's controlling, and it
*still*gets the job done. Controllers seem like a class of entities that are best modeled by intentionality, in that they alter the state of their external environment to match their desired internal environment based on their perceptions, and can do so in arbitrarily complicated and powerful ways, but while they do steer the future they don't seem to be cross-domain and they don't look like anthropomorphic models of "human intelligence."

Control theory is an actual, real engineering subject. Not only this self-help, psychology, wow, mind-blown, feel-good BS.

Yep! That's one of the reasons I find the application of controls to psychology as interesting as I do. I've taken about two years of controls classes at the graduate level, with a heavy emphasis on their use in aerospace (as my examples might suggest), though I don't yet use it in my professional work (which is more pointed towards numerical optimization and machine learning).