Ballistics thought experiment: (Warning: I am not an engineer and barely remember my high school physics)
You make a hollow round steel shield and make it a vacuum inside. You put a slightly smaller steel disc inside the vacuum region. You make that second disc rotate very fast. Very fast indeed.
An incoming projectile hits your shield. It is several times thicker than all three layers of your shield combined. It easily penetrates the first layer, passing through to the vacuum region. It contacts the speedily spinning inner layer, and then things get crazy... the tip of the projectile gets eroded by the spinning inner layer (Yes, it's spinning faster than the projectile is travelling, I told you it was fast).
I'm not sure what happens next, but I can think of two plausible possibilities:
1. The projectile bounces off the inner layer, because it's effectively been blocked not just by the material in front of it but by a whole ring of material, which collectively has more mass than the projectile. The ring slows down a bit and maybe has a dent in it now, a perfectly circular groove.
2. The inner layer disintegrates, but so does the projectile. The momentum of the ring of material that impacts the projectile is transferred to the projectile, knocking it sideways and probably breaking it into little melty pieces. The part of the inner layer outside the ring of material is now a free-spinning hula-hoop, probably a very unstable one which splits and shoots fragments in many directions.
Either way, the projectile doesn't make it through your shield.
So, does this work?
If it works, would it be useful for anything? It seems to be a relatively light form of armor; most armor has to be of similar (or greater) thickness to the projectile in order to block it, but this armor can be an order of magnitude less thick, possibly two or three. (Well, you also have to remember to account for the weight of the outer layer that holds back the vacuum... But I expect that won't be much, at least when we are armoring against tank shells and the like.)
So maybe it would be useful on tanks or planes, or ships. Something where weight is a big concern.
The center of the shield is a weak point I think. You can just put conventional armor there.
Problem: Aren't spinning discs harder to move about than still discs? They act like they have lots of mass, without having lots of weight? I feel like I vaguely recall this being the case, and my system 1 physics simulator agrees. This wouldn't reduce the armor's effectiveness, but it would make it really difficult to maneuver the tank/plane/ship equipped with it.
Problem: Probably this shield would become explosively useless after blocking the first shot. It's ablative armor in the most extreme sense. This makes it much less useful.
Solution: Maybe just use them in bunkers? Or ships? The ideal use case would be to defend some target that doesn't need to be nimble and which becomes much less vulnerable after surviving the first hit. Not sure if there is any such use case, realistically...